Concealed Headrail Brackets

Fit the supplied brackets in one of 3 positions depending on your requirements. Either into the window recess, the window frame, or an area outside the window opening. If fitting inside the recess take care to allow for any handles or other objects that could hamper the operation of the blind.

The bracket screws directly to a horizontal surface above the blind location.

Fit one bracket at either end of the blind, in a position between the end of the headrail and the start of the control mechanism. Further brackets, if supplied, should be fitted equidistantly between the end brackets. Care must be taken not to place a bracket in such a position that it interferes with the operation of the blind ie. near control rods and cords. With the brackets in place, push the front of the blind until it engages into the front two legs of the bracket. Push the rear of the blind until it is flush against the inside of the bracket. At this point gently push the finger tab towards the blind to engage the rear tab into the rear of the blind. Your blind is now firmly fitted in position.